You searched for 10 x 2.0mm ground hss drill bits metric high speed
10 x 2.0mm Ground HSS Drill Bits Metric High Speed Steel Jobber Twist Drills 2mm- 10 x 2.0mm Ground HSS Drill Bits Metric High Speed Steel Jobber Twist Drills 2mm
- brand new
- Manufactured To DIN338 Standard From M2 Grade HSS Material
- Titanium Nitride (TiN) Coated To Increase Tool Life
- Ideal For Use On Alloyed & Non Alloyed Steel, Non Ferrous, Cast Iron & Hard Plastics
- 135 Degree Split Point From 3mm & Above Eradicates The Need To Pre-drill or centre punch, Prevents Walking & Enables Faster Penetration
- Same Day Despatch From Our Factory In Manchester UK, If Ordered Before 3pm
- Manufactured To DIN338 Standard From M2 Grade HSS Material
- Titanium Nitride (TiN) Coated To Increase Tool Life
- Ideal For Use On Alloyed & Non Alloyed Steel, Non Ferrous, Cast Iron & Hard Plastics
- 135 Degree Split Point From 3mm & Above Eradicates The Need To Pre-drill or centre punch, Prevents Walking & Enables Faster Penetration
- Same Day Despatch From Our Factory In Manchester UK, If Ordered Before 3pm
- [8 SIZES DRILL BITS FOR DIFFERENT NEEDS]There’re 8 pcs extra long drill bits with 8 different sizes(4\4.2\4.5\5\5.2\6\8\10mm), and you can choose bits in different sizes to drill various holes as you want.
- [200MM & HIGH QUALITY MATERIAL]The drill bits in the pack is 200mm, which are longer and drill deeper than standard ones. Made of High-speed steel, these twist drill bits are durable, and they have high abrasion resistance&long service life.
- [DOUBLE-GROOVE DRILL&ROUND SHANK]With the double groove chip removal design, these drill bits can speed up the process of drilling and chip removal.And the round shank is suitable for most types of hand drills and impact drills.
- [EXQUISITE CRAFT]Twist drills are formed after quenching, and they meet the industrial tolerance standards for bore diameters. Each bit meets industrial performance and safety standards.
- [WIDE APPLICATION]Suitable for various materials, such as die steel, spring steel, white steel, ordinary steel, aluminum, copper, wood, stainless steel(within 1-4mm), plastic and PVC,etc.
- each 10 drills in sizes: 1,0mm, 1,5mm, 2,0mm, 2,5mm, 3,0mm, 3,5mm, 4,0mm, 4,5mm, 5,0mm, 5,5mm, 6,0mm, 6,5mm, 7,0mm, 7,5mm, 8,0mm
- each 5 drills in sizes: 8,5mm, 9,0mm, 9,5mm, 10,0mm
- cobalt alloyed (Co5) for extreme demands in difficult to machine materials (>800N / mm²)
- fully ground, type N, cylindrical, short, right hand cutting, split point from >=3,0mm
- DIN338, 135° point angle
- Suitable for drilling and tapping in plastic, wood and soft metal like aluminum, iron, etc. These taps are made from high-speed steel and surface finished by nitriding for high hardness and rust resistance.
- There are total 6 pieces of taps in different sizes from M3 to M10 that you can use for tapping various threads. Thread(Metric): M3*0.5, M4*0.7, M5*0.8, M6*1, M8*1.25, M10*1.5
- Recommended for use on tapping machine, pay attention when using hand drills. Taps are designed with spiral flutes and the chip clearing process would be better.
- They are taps with drilling function, used to drill a hole and cut new threads at the same time, you will have a smooth tapping experience with them.
- These taps are used on a machine to do the tapping, generally more accurate because human error is eliminated.
- High quality - Made of high-speed steel(HSS), high hardness and rust resistance for longer life.
- Various sizes - There are total 6 pieces of drill taps in different sizes from M3 to M10 that you can use for tapping various threads.
- Design - Taps are designed with spiral flutes and the process of chip cleaning would be better.
- Function - They are taps with drilling function, used to drill a hole and cut new threads at the same time, saving labor and time.
- Widely used - Suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron and so on.
- 【Suitable for】Drilling and tapping in plastic, wood and soft metal like aluminum, iron, etc. These taps are made from high-speed steel for high hardness and rust resistance.
- 【Self-centering design】Do not need additional center drilling or center punching.It could decrease processing steps greatly, save time and improve working efficiency.
- 【Metric】M3x0.5, M4x0.7, M5x0.8, M6x1, M8x1.25, M10x1.5.Shank:1/4 inch (6.35mm) hex shank. You can use for tapping various threads.
- 【Suggestion】Recommended for use on tapping machine, pay attention when using hand drills. Taps are designed with spiral flutes and the chip clearing process would be better.
- 【Material】HSS (4341) High hardness, rustproof, solid and durable.
- Material: HSS / High Speed Steel
- Surface treatment: Titanium coated; Shank size: 1/4" hex shank
- Suit for use in hardness under 25° artifacts, the plate thickness under 5mm
- Type: 10 steps (4mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm, 22mm)
- Step Cone Drill Bit Hole Cutter 4-22MM HSS Great For Sheet Metal"#0025/57.4-22MM HSS 4241 Hex Titanium Step Cone Drill Bit Hole Cutter For Sheet Metal
- Material: High Speed Steel. Containing Sizes: 4mm, 4.2mm, 4.5mm, 5mm, 5.2mm, 6mm, 8mm, 10mm. 1 pcs each size, different sizes of the most popular twist drill bits
- Extremely high hardness, in the drilling work has excellent processing performance, all grinding sharp ligament sticky milling work hole smooth no burr
- Sharp twisted drill bits will make the drilling easier and more effortless, extra long cutting edge allows you using these bits to drill deep holes
- Good toughness of materials, wear resistance, drilling ability. Apply to: Wood, Plastic and Aluminum Alloy Material
- Ideal for DIY, Home And General Building / Engineering Using
- HSS-R roll forged 4341 high speed steel
- Manufactured to DIN340 with 118 degree point
- General purpose 'jobber' drill bits
- For drilling steel, aluminium, non-ferrous metals, plastics and wood
- Use cooling agent and drill at slow speeds for results in metals
- Top Quaity:Made of Cobalt steel,It has better hardness, wear resistance and high temperature resistance than carbon steel. By heat treatment, the hardness reaches HRC61-63.
- For electric drills, rechargeable drill drivers, rechargeable drivers, drilling machines. Suitable for standard drill chuck and normal round collet chuck.
- Suitable for iron, copper, aluminum, plastic, wood materials such as woodwork, ironwork, and metalwork. And it is necessary not only for professional users but also for home DIY enthusiasts.
- 15-piece set 1.5 to 10 mm in diameter: The twist drill set includes 1.5 to 10 mm in diameter, and includes a total of 15 drill bits.
- Satisfaction: ASNOMY aims to provide high-grade products and customer service to all customers. Any problems, just contact us and our after-sale team will solve your problems ASAP.
- High quality hand tap drill hex shank HSS screw spiral point thread metric plug drill bits.
- Shank:1/4 inch (6.35mm) hex shank. Metric : M3x0.5, M4x0.7, M5x0.8, M6x1, M8x1.25, M10x1.5.
- Drilling and tapping in one, one-step processing, greatly save processing steps and time costs, improve working efficiency.
- More durable: Have sufficient bending strength and wear resistance.
- Suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron, etc.
- 【HIGH QUALITY】 - 100% brand new and high quality. These taps are made from high speed steel and surface finished by nitriding for high hardness and rust resistance
- 【USE FOR TAPPING VARIOUS THREADS】- There are total 6 pieces of taps in different sizes from M3 to M10 that you can use for tapping various threads
- 【SPIRAL FLUTES】 - Taps are designed with spiral flutes and the chip clearing process would be better. These taps are used on a machine to do the tapping, generally more accurate because human error is eliminated
- 【SMOOTH TAPPING】 - They are taps with drilling function, used to drill a hole and cut new threads at the same time, you will have a smooth tapping experience with them
- 【MORE EFFICIENT】 - Drilling and tapping in one, one-step processing.Greatly save processing steps and time costs, improve working efficiency
- HSS Cobalt 5% Jobber Drill Bit Drills Bits For stainless Hard Steels
- HSS Cobalt 5% Jobber Drill Bit Drills Bits For stainless Hard Steels
- 5% Cobalt 118 Degree Split Point Jobber Drill
- Ideal For Drilling Stainless Steel And Hard Steels
- Made to DIN338 Standards
- All Orders are Despatched The Same Day from Our Factory In Manchester, UK
- HSS Cobalt 5% Jobber Drill Bit Drills Bits For stainless Hard Steels